• <input id="uaowu"><source id="uaowu"></source></input>
    <abbr id="uaowu"><menu id="uaowu"></menu></abbr>
  • 亚洲色最新高清AV网站,波多野结衣AV一区二区全免费观看 ,AV最新高清无码专区,国产一区亚洲一区,亚洲丰满熟女一区二区蜜桃,国产亚洲女在线线精品,人伦片无码中文字幕,国产精品综合av一区二区国产馆
    Home > Product > Product Detail
    Product Detail

    BTL Taper Bushings-B series

    Range of product: DIN:(1008/1180/1210/1215/1310/1610/1615/2012/ 2517/2525/3020/3030/3535/4040/4545/5050) Metric size product (Apply to DIN market) BTL Taper Bushings-B series

    Product Details

    Development History:

    TB-Bushings(short for Taper Lock Bushings) was designed and introduced in the 1970s. By achieving secure and easy 

    installation between bore and the shaft, they were used to replace the traditional bore to size products as a relatively 

    new type of connection method. This product was then applied for patents in Europe, the US, Japan as well as the rest 

    of the world, with the patent protection lasting until the mid-1980s. 

    Taper bushing were gradually popularized and applied to various shaft to output conne-ctions, such as sprockets, 

    sheaves, couplings, timing pulleys and other transmission parts. The increased usage throughout the industrial market 

    boosted the standardization and commercialization of this product and turned it into a highly successful standardized 

    industrial component. 

    In the mid-to-late 1980s, along with the reform and opening pohc1es 1n China and with the rising production cost in 

    Europe, many European firms took the initiative to source high-quality and low-cost transmission parts from China to 

    export to the European market. 

    In 1986, Shijiazhuang Sprocket General Factory (CHSSB) began serial production of sprockets and other power 

    transmission components for the export market. In 1989, CHSSB took the initiative in producing TB bushings for export 

    to Europe, eventually achieving an annual production capacity of 500,000 sets. In 1994, CHSSB was responsible for 

    drafting the original "Taper Bushing Type, Main Dimensions and Basic Paramet -ers" Machinery Industry Standard of the 

    People's Republic of China (JB/T 7513-1994), which was approved and implemented by the Ministry of Machinery Industry 

    of China in October 1994.

    In 2015, CAPT Power Transmission Co., Ltd. (CAPT), became responsible for drafting the JB bushing standard, and made 

    comprehensive revisions to the JB/T 7513-1994 "Taper Bushing Type, Main Dimensions and Basic Parameters" in accordance 

    with the relevant requirements of GB national standards. This included requirements and regulations for the application and 

    quality control of taper bushings. The National Standard of the People's Republic of China GB/T 32220-2015 was officially 

    iss -ued in 2015 by General Administration of Technical Supervision and Technical Standards Committee of the People's 

    Republic of China and officially implemented on July 1, 2016.

    Advantage of CAPT:

    CAPT Power Transmission Co. , Ltd. (CAPT) has a history of more than 30 years in producing the full range of steel TB 

    bushings, which are produced in strict accordance with international (DIN, ANSI, ISO, etc.) and domestic (GB) standards. 

    The products are of the highest quality, manufactured with precision equipment and reliable materials , becoming a leading 

    supplier in the international and domestic markets. 

    Adhering to the core concept of "Superior Ingenuity" , in the past 30 years CAPT has made significant investments in refining 

    the production process by using intelligent production systems and equipment to improve efficiency and reduce costs. Fast 

    and flexible production can be carried out according to customer demands to achieve the ultimate combination of precision, 

    reliability, and cost effectiveness. 

    Quality Characteristics:

    1. Material directly affects the strength and reliability of the product. Because the working principle of the taper bushings is

     to lock the taper surface with the tightening screws, insufficient strength of the main body material will lead to cracking or

     even damaging the taper surface and thread (commonly known as thread slipping/ stripping). Insufficient main body strength 

    can also damage the keyway during connection to the shaft due to the same reason (commonly known as rolling key) and the 

    product will ultimately fail. 

    Chinese GB National Standard: Main body material of taper bushing is C45 steel (Mpa>600) and grey cast iron HT250 (Mpa>250). 

    CAPT Standard: Main body material of taper bushing 1s C45 steel (Mpa>600). 

    Normal market standard: Main body material is grey cast iron HT200 (Mpa>200) which has low strength and does not meet 

    Chinese GB national standard or international standards. 

    2. The following are the main factors that affect installation, usage, and failures: differences in product manufacturing technique 

    and quality control standards on bore size, mounting screw holes and keyway accuracy.

    3. The tightening screws used for the taper bushes are also key accessories. The connection between the taper bushing, the shaft 

    and the bore depends entirely on the tightening force generated by the screw, so that the shaft, the bore and the keyway can be 

    connected reliably. Therefore, the GB national standard clearly stipulates the torque requirements of the screw (grade 12.9).

    Chinese GB National Standard: Screw grade 12.9. 

    CAPT Standard:Source g『ade 12.9 screws internationally with clear identification markings. 

    Normal market standard: To save cost, the screw quality fluct -uates between grade 8.8 to grade 12.9 without appropriate 

    identification markings.

    Screw grade and material list: 

    Grade 8.8 screws: C45 steel; 

    Grade 10.8 screws: 40Cr;

    Grade 12.9 screws: 42CrMo. 

    Material Comparison:

    英文.png



    Product range:

    Standards

    Series Type

    SizeRange

    DIN

    1008

    1/2”-1”

    1108

    1/2”-1”

    1210

    1/2”-1 1/4”

    1215

    1/2”-1 1/4”

    1310

    1/2”-1 3/8”

    1610

    1/2”-1 5/8”

    1615

    1/2”-1 5/8”

    2012

    1/2”-2”

    2517

    1/2”-2 1/2”

    2525

    7/8”-2 1/2”

    3020

    7/8”-3”

    3030

    15/16”-3”

    3535

    1 3/16”-3 1/2”

    4040

    1 7/16”-4 7/16”

    4545

    1 15/16”-4 3/4”

    5050

    2 7/16”-5”

    DIN Catalog:DIN BTL Taper Bushings-B series.pdf


    主站蜘蛛池模板: 伦人伦xxxx国语对白| 40岁大乳的熟妇在线观看| 成人福利国产精品视频| 国产免费久久久久久无码| 久久精品AⅤ无码中文字字幕蜜桃 女人乱人伦国产在线观看 | 亚洲αⅴ无码乱码在线观看性色 | 亚洲综合在线网| 亚洲国产中文字幕精品| 999精品在线视频| 亚洲aⅴ天堂av天堂无码麻豆 | 可以直接免费观看的av网站| 亚洲国产精品日韩av不卡在线| 又大又粗又长的高潮视频| 无码国产精品一区二区免费3P| 亚洲人成人一区二区三区| 国产视频资源| 国产精品高潮呻吟av久久软件| 久久婷婷五月综合色高清| 亚洲高清中文字幕在线看不卡| 亚洲人成亚洲人成在线观看| 丰满少妇人妻无码| 国产三级av在线播放| 亚洲欧美在线综合色影视| 三上悠亚久久精品| 亚洲综合成人婷婷五月在线观看| 图图国产亚洲综合网站| 亚洲中文字幕无码人在线| 国产网红无码精品福利网| 天天综合网色中文字幕| 亚洲夂夂婷婷色拍WW47| 18pao成人国产永久视频| 熟女蜜臀av麻豆一区二区| 又爽又黄又无遮挡的激情视频| 亚洲成a人片77777在线播放| 妓女爽爽爽爽爽妓女8888| 国产午夜福利精品一区二区三区| 日韩精品一区二区亚洲av观看 | 97久久久亚洲综合久久| 国产乱人伦偷精品视频下| 色伦专区97中文字幕| 激情综合网址|