Product introduction：
NSPT has series of engineered conveying sprockets and matching conveying chains of different varieties.
We manufacture engineered sprockets with and without hub, finished bore or taper bore. (All pitches are
within 6" and maximum diameter is 80".) NSPT engineered conveying sprockets are made of high quality
steel, fine teeth milled on CNC center, high frequency hardened to HRC4050, showing advantages of good
hardiness, wear-resisting and long life.
Product range：
Standards | Series Type | SizeRange |
ANSI | 1654,PITCH-1.654" | 1654C12-1654C60 |
2069,PITCH-2.609" | 2609C08-2609C60 | |
3067,PITCH-3.067" | 3067C10-3067C48 | |
3075,PITCH-3.075" | B3075C07-B3075C18 | |
A3075,PITCH-3.075" | A3075C08-A3075C60 | |
3500,PITCH-3.500" | 3500C10-3500C48 | |
4000,PITCH-4.000" | 4000C06-4000C16 | |
4063,PITCH-4.063" | 4063C06-4063C48 | |
4500,PITCH-4.500" | 4500C10-4500C48 | |
5000,PITCH-5.000" | 5000C10-5000C48 | |
6050,PITCH-6.500" | 6050C06-6050C12 |
ANSI Catalog:
ANSI Flame Cut Sprockets.pdf
<li id="2e2e4"></li> <li id="2e2e4"></li> <rt id="2e2e4"></rt>